Ansjer smart IPCs(C510,C511,C610) support auto mirror function. For box cameras, move the base to adapt to Ceiling Mounting or desktop mounting.Mirror function is usually used when the device is installed upside down Notic:Since there is a gravity sensing element inside the camera, it will make a sound when you scrolling the camera, it is not the parts drop sound.
It mainly depends on environment:If the transmitting path is interdicted by cement or steel, the signal attenuation is obvious; Normally IP product performs well for 100m outdoor and 50m indoor. Camera supports Wi-Fi standard: IEEE 802.11b/g/n
(1). Before recording, please format the SD card (please note: before formatting the SD card, you need to switch the recording mode to manual record and keep closed, you can’t start to record until the format finished.) (2). It is caused by the camera didn’t save the time, the time will jump to the initial time automatically after unplugged the power supply and reboot, which will result in you can’t search the recording according to the time. Please remotely help the client to upgrade the profile.
After connecting camera with power, you can use “Smartlink”：In the device list to click “ ” -- “Smartlink” -- Next --please input wifi password -- Next, then the camera will connect wifi automatically, after connected successfully, it will allow you to reset the password. If you don’t hear the “dee” sound, please try to reset the camera (find the reset hole at the bottom of the device and insert the needle in standby status. After hearing the“dee”sound last for more three seconds and another louder sound, the reset is successful.) If the smartlink can’t work, please try a wired connection to configure the wifi (after connected the network line, please click “Settings” -- “Network Settings” , then select the wifi that you want to connect to set up) . After connected, you will find a green tick behind the wifi. If these two methods can’t work, else failed to configure the WIFI, please return for repair.